• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Thank you for the reply.  No the diagram I posted is from the Regency Range Gain owner's manual and it is how mine is wired particularly related to V7 which is completely different than the Sam's. I think there are considerable errors in the Sam's when it comes to V7's wiring. For the most part though my voltages line up with what the Sam's says with the exception of V2 pin 1 and and V12 pin 2.


In regards to pin 2 of V12 your explanation makes sense. I ordered a VNA so hopefully I can align the Regency  (if I can figure out the VNA) and correct V12. As for V2, I think it might be a typo or duplication from V2 pin 6 because I'm not sure how you would end up with the same voltage value when you're feeding the pins the same voltage but one is passing through a 22k resistor and the other through a 1k (pin 6). I could be wrong however.


The other 6AN8 tube (V8) is fed 270vdc to pin 1 through a 33k resistor ending up with 180vdc which is closer to what I'm getting at V2 pin 1. Regrettably the owner's manual has very few voltages so I can't cross reference that particular value. Let me know your thoughts regarding V2 pin 1. Thanks!


Jacob