You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

is there also a silver mica cap going from the combiner to ground....or a metal mica???

Lift up the leg of each pill that is on the top like you were reading the pill info....it is also the leg with the corner cut off. then take an ohm meter and ck it like a diode......the values should be close on all four pills......this works most of the time....I get some false negitives sometimes where the pill will still work. IT is better just to replace it.....is the little resistors going from the input end going to ground.....if they are burned you have a pill burned most likely. If two are bad i replace all of them and put the two good ones in my used parts bin. cb tricks should have a amp or one close to find your values. are you talking about the resistor that is built in the combiner or just a final resistor before going to the relay???? Spend some time with your meter....... Good luck

galyn davis

<blockquote data-quote="bettyeboop" data-source="post: 110214" data-attributes="member: 5385">is there also a silver mica cap going from the combiner to ground....or a metal mica???Lift up the leg of each pill that is on the top like you were reading the pill info....it is also the leg with the corner cut off.&nbsp; then take an ohm meter and ck it like a diode......the values should be close on all four pills......this works most of the time....I get some false negitives sometimes where the pill will still work.&nbsp; IT is better just to replace it.....is the little resistors going from the input end going to ground.....if they are burned you have a pill burned most likely.&nbsp; If two are bad i replace all of them and put the two good ones in my used parts bin.&nbsp; cb tricks should have a amp or one close to find your values.&nbsp; are you talking about the resistor that is built in the combiner or just a final resistor before going to the relay???? Spend some time with your meter....... Good luckgalyn davis</blockquote>

[QUOTE="bettyeboop, post: 110214, member: 5385"] is there also a silver mica cap going from the combiner to ground....or a metal mica??? Lift up the leg of each pill that is on the top like you were reading the pill info....it is also the leg with the corner cut off. then take an ohm meter and ck it like a diode......the values should be close on all four pills......this works most of the time....I get some false negitives sometimes where the pill will still work. IT is better just to replace it.....is the little resistors going from the input end going to ground.....if they are burned you have a pill burned most likely. If two are bad i replace all of them and put the two good ones in my used parts bin. cb tricks should have a amp or one close to find your values. are you talking about the resistor that is built in the combiner or just a final resistor before going to the relay???? Spend some time with your meter....... Good luck galyn davis [/QUOTE]

Top Bottom