You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

What rig are you going to use? You can certainly do both rig control and digital modes from the PC using a soundcard interface, but how difficult it is to set up will depend on the software in use and the rig. You mentioned CI-V so that sounds like an Icom rig to me. Usually the rig control is handled by a serial port using the CAT/CI-V commands. If the rig does not support PTT via CAT/CI-V, then you need another virtual serial port. The rigblaster plug and play will work with several different software programs; which one are you planning on using? Depending on the rig, this should work fine with either MIXW or HRD/DM780.

[QUOTE="Moleculo, post: 256952, member: 1"] What rig are you going to use? You can certainly do both rig control and digital modes from the PC using a soundcard interface, but how difficult it is to set up will depend on the software in use and the rig. You mentioned CI-V so that sounds like an Icom rig to me. Usually the rig control is handled by a serial port using the CAT/CI-V commands. If the rig does not support PTT via CAT/CI-V, then you need another virtual serial port. The rigblaster plug and play will work with several different software programs; which one are you planning on using? Depending on the rig, this should work fine with either MIXW or HRD/DM780. [/QUOTE]

Top Bottom