Hello guys okay? I have a linear ITALY RM-KL-500, I would like to know how to eliminate the power selection switch, there is a jumper?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
RM ITALY KL-500
- Thread starter PU8WWW
- Start date
To defeat that switch which has multiple input tuning circuits would require doing just that, by chosing one of it's tuning circuit which would be the one for highest output for obvious reasons.
Laziness perhaps as it's a bother to turn the switch and I solved that problem on a palomar amp by just switching it to the high position and not turning it again.
The problem was that I Kl, damaged the key, along with trillha where the plaque is the key, I would make a jumper and leave it at full power since the use of a mobile device that comes with 5 watts.
Might be the easiest route to place a jumper across the switch for high output operation.
The amp has 6 output positions then you would have to find which circuit controls the highest output.
Here is a modification you may also be interested in.
Your browser will need to translate it to Italian if you do not speak German.
Umbauanleitung KL500 auf saubere Modulation
The amp has 6 output positions then you would have to find which circuit controls the highest output.
Here is a modification you may also be interested in.
Your browser will need to translate it to Italian if you do not speak German.
Umbauanleitung KL500 auf saubere Modulation
Not being totally sure the switch you're referring to may have internal devices that are actually part of the input tuning network.
...runna pile-up on 6m SSB