You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I started the alignment made it thru the PLL then the next is the AM receiver
as shown below. I found TP12 underside and the trace is cut and then the can is soldered to the FET. Compared to another Robyn and nothing else on the bottom side seems to be any different. Would anyone know why this would have been done? Stopped the alignment for the moment to see if anyone knows.

73
Richard
[ATTACH=full]58253[/ATTACH][ATTACH=full]58254[/ATTACH]

[QUOTE="RichardHartman, post: 787811, member: 54277"] I started the alignment made it thru the PLL then the next is the AM receiver as shown below. I found TP12 underside and the trace is cut and then the can is soldered to the FET. Compared to another Robyn and nothing else on the bottom side seems to be any different. Would anyone know why this would have been done? Stopped the alignment for the moment to see if anyone knows. 73 Richard [ATTACH type="full"]58253[/ATTACH][ATTACH type="full"]58254[/ATTACH] [/QUOTE]

Top Bottom