You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

To get a clean start I made this fresh post..

Anyone with a ROHN tower feel free to chime in.

ROHN 25 non-guyed. Total height of 30' and then the 5' base section down in concrete.

Can't decide on AG3 rocket top with 2" ID top mast outer sleeve or some other type of top.

Going with proposed Yaesu G450a rotor for it.

Maco 103c 3.99 sq ft. or Sirio 27-3 3 element beam with my A99 on top of that.

Getting conflicting suggestions on whether to use a bearing/bushing or just run the AG3 rocket top with a 2" mast pipe poking up..

Cost of the 30' with AG3 is $570 and $170 s/h.. NormsFab rotor shelf is $40 and $20 s/h..

[QUOTE="CB590, post: 654663, member: 47647"] To get a clean start I made this fresh post.. Anyone with a ROHN tower feel free to chime in. ROHN 25 [B]non-guyed[/B]. Total height of 30' and then the 5' base section down in concrete. Can't decide on AG3 rocket top with 2" ID top mast outer sleeve or some other type of top. Going with proposed Yaesu G450a rotor for it. Maco 103c 3.99 sq ft. or Sirio 27-3 3 element beam with my A99 on top of that. Getting conflicting suggestions on whether to use a bearing/bushing or just run the AG3 rocket top with a 2" mast pipe poking up.. Cost of the 30' with AG3 is $570 and $170 s/h.. NormsFab rotor shelf is $40 and $20 s/h.. [/QUOTE]

Top Bottom