You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Found this place with custom pipe..

$30..

6" of 2" od with 1.5" ID to slide into the 2" mast.. then 18" of 1.5" OD (0.120" wall thickness) to slide into that.

I would bolt and mig weld it.. then put A99 on that with factory U bolt.

Overkill maybe??

Would schedule 40 1.5" ID with 1.90" OD accomplish the same thing as fast as mating with a 2" mast pipe??

Didn't think to ask what the ID was.of 2" mast pipe.. duh..

[ATTACH=full]27420[/ATTACH]

[QUOTE="CB590, post: 654850, member: 47647"] Found this place with custom pipe.. $30.. 6" of 2" od with 1.5" ID to slide into the 2" mast.. then 18" of 1.5" OD (0.120" wall thickness) to slide into that. I would bolt and mig weld it.. then put A99 on that with factory U bolt. Overkill maybe?? Would schedule 40 1.5" ID with 1.90" OD accomplish the same thing as fast as mating with a 2" mast pipe?? Didn't think to ask what the ID was.of 2" mast pipe.. duh.. [ATTACH=full]27420[/ATTACH] [/QUOTE]

Top Bottom