You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Ok Conor, here are my 3 A99 models with no radials set at 21' to the feed point with masts lengths set at 21', 16.4', and 10' feet below the antenna.

Models have no isolation and no feed lines included in the models.

1. these 3 overlays from my A99 matched models, using a 40:1 transformer and a simulated choke 51" inches down on the mast to help mitigate CMC.

2. I also added 3 overlays for the A99 model that was not matched for comparison.

[QUOTE="Marconi, post: 734390, member: 903"] Ok Conor, here are my 3 A99 models with no radials set at 21' to the feed point with masts lengths set at 21', 16.4', and 10' feet below the antenna. Models have no isolation and no feed lines included in the models. 1. [B]these 3 overlays from my A99 matched models[/B], using a 40:1 transformer and a simulated choke 51" inches down on the mast to help mitigate CMC. 2. I also added [B]3 overlays for the A99 model that was not matched[/B] for comparison. [/QUOTE]

Top Bottom