You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Well DB it looks like I missed the mark on my earlier comments regarding what I saw with the radial currents and phase on your model and what it indicates.

However, my model indicates that 21 of the 24 segments assigned for each of the radials shows the opposite of your model in the radial area...approximately 80% of the segments in my model are out of phase with the 1/2 wave radiator.

Do you have any ideas as to why our models are so different?

Below are my A99 models at 32' where I tried to duplicate your models. I have attached my tabular Currents Data report to the model with radials, and I added some notes. BTW, I set the power for my model to 95 watts in order to try and get my current magnitudes close to what your model shows. They are close, but I don't think they always jive.

[ATTACH]12212[/ATTACH]

I apologize to faosfm for getting of track in your thread.

<blockquote data-quote="Marconi" data-source="post: 461139" data-attributes="member: 903">Well DB it looks like I missed the mark on my earlier comments regarding what I saw with the radial currents and phase on your model and what it indicates. &nbsp;However, my model indicates that 21 of the 24 segments assigned for each of the radials shows the opposite of your model in the radial area...approximately 80% of the segments in my model are out of phase with the 1/2 wave radiator. &nbsp;Do you have any ideas as to why our models are so different?&nbsp;Below are my A99 models at 32&#039; where I tried to duplicate your models. I have attached my tabular Currents Data report to the model with radials, and I added some notes. BTW, I set the power for my model to 95 watts in order to try and get my current magnitudes close to what your model shows. They are close, but I don&#039;t think they always jive. &nbsp;[ATTACH]12212[/ATTACH]&nbsp;I apologize to faosfm for getting of track in your thread.</blockquote>

[QUOTE="Marconi, post: 461139, member: 903"] Well DB it looks like I missed the mark on my earlier comments regarding what I saw with the radial currents and phase on your model and what it indicates. However, my model indicates that 21 of the 24 segments assigned for each of the radials shows the opposite of your model in the radial area...approximately 80% of the segments in my model are out of phase with the 1/2 wave radiator. Do you have any ideas as to why our models are so different? Below are my A99 models at 32' where I tried to duplicate your models. I have attached my tabular Currents Data report to the model with radials, and I added some notes. BTW, I set the power for my model to 95 watts in order to try and get my current magnitudes close to what your model shows. They are close, but I don't think they always jive. [ATTACH]12212.vB[/ATTACH] I apologize to faosfm for getting of track in your thread. [/QUOTE]

Top Bottom