You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I am having some issues with my SWR, when I check the SWR on CW on my HTX-100 it reads a 1:1:3 on 7 and 25 watts out and when switched to SSB the needle never goes past where it was when I set the SWR cal. on CW, but when I put my JAWS II 150 ( a 150 watt amp) inline the SWR swings from nothing to full scale, I know your not supose to check SWR on SSB but I was concerned about this since when I switched to SSB from CW to cal. the SWR it never went past the SWR readout on CW until after I added the amp.

Update: just took an SWR reading with the amp inline on CW and it reads 1:3!?

T23

[QUOTE="T23, post: 272968, member: 13052"] I am having some issues with my SWR, when I check the SWR on CW on my HTX-100 it reads a 1:1:3 on 7 and 25 watts out and when switched to SSB the needle never goes past where it was when I set the SWR cal. on CW, but when I put my JAWS II 150 ( a 150 watt amp) inline the SWR swings from nothing to full scale, I know your not supose to check SWR on SSB but I was concerned about this since when I switched to SSB from CW to cal. the SWR it never went past the SWR readout on CW until after I added the amp. Update: just took an SWR reading with the amp inline on CW and it reads 1:3!? T23 [/QUOTE]

Top Bottom