You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

No my bracket is thinner than theirs. I had to build my own because I had to mount it to a1 1/4" pipe and their bracket wasn't wide enough.

Thanks for you guys help

I want to thank all you guys for your help, I'm going to take that mount apart tomorrow and see what's what. I know about your basic so-239 stud mount but this one was some different and it may be something I did wrong. I'm not transmitting on my radio with the high swr's till I get it right. This was supposed to be temporary till I get my lean over pole built and use an old A99 I had . So later guys, I'll post on my progress in a few days.

[QUOTE="Dannell Boyd, post: 782529, member: 61812"] No my bracket is thinner than theirs. I had to build my own because I had to mount it to a1 1/4" pipe and their bracket wasn't wide enough. Thanks for you guys help I want to thank all you guys for your help, I'm going to take that mount apart tomorrow and see what's what. I know about your basic so-239 stud mount but this one was some different and it may be something I did wrong. I'm not transmitting on my radio with the high swr's till I get it right. This was supposed to be temporary till I get my lean over pole built and use an old A99 I had . So later guys, I'll post on my progress in a few days. [/QUOTE]

Top Bottom