You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

OK, I agree, but I'm almost positive that there is supposed to be a Teflon isolator sleeve / bushing in the hole in the bracket where the SO-239 passes through to prevent the SO-239 contacting with metal. As I suggested, the first experiment would be to remove the spring and check the SWR and go from there.

[QUOTE="Recon, post: 782531, member: 55589"] OK, I agree, but I'm almost positive that there is supposed to be a Teflon isolator sleeve / bushing in the hole in the bracket where the SO-239 passes through to prevent the SO-239 contacting with metal. As I suggested, the first experiment would be to remove the spring and check the SWR and go from there. [/QUOTE]

Top Bottom