You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Looking at Recon's picture in post #28, I don't see any slots in the threaded portion of the S0-239. I have seen this before. It does not allow the PL-259 to seat properly to the S0-239. Typically there are 4 "Barbs" on the "braid side" of the PL-259 connector. Easily solved with a Dremel tool on the S0-239 so that the PL-259 seats completely in the S0-239.

Just a random thought.

73
David

[QUOTE="Dmans, post: 782555, member: 49046"] Looking at Recon's picture in post #28, I don't see any slots in the threaded portion of the S0-239. I have seen this before. It does not allow the PL-259 to seat properly to the S0-239. Typically there are 4 "Barbs" on the "braid side" of the PL-259 connector. Easily solved with a Dremel tool on the S0-239 so that the PL-259 seats completely in the S0-239. Just a random thought. 73 David [/QUOTE]

Top Bottom