You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I had issues with the Wilson bee-hive mount in a mobile set-up. My issues disappeared when I replaced it with a stainless heavy-duty.
In my experience the light or medium duty springs can cause continuity problems when they've been used for a while. And IMO the spring is not needed for length in your current setup, especially for the upper half of the band.
Glad you're up and running and were able to solve your problems. The radials did the trick.

73

[QUOTE="Crawdad, post: 782912, member: 48522"] I had issues with the Wilson bee-hive mount in a mobile set-up. My issues disappeared when I replaced it with a stainless heavy-duty. In my experience the light or medium duty springs can cause continuity problems when they've been used for a while. And IMO the spring is not needed for length in your current setup, especially for the upper half of the band. Glad you're up and running and were able to solve your problems. The radials did the trick. 73 [/QUOTE]

Top Bottom