You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Good afternoon,

Yes I marked the original position and tried turning in both directions. It did not change any it stayed 1.74v. Then I returned it back to its original position.

Thank you for the info on the 8719 and the cap kits. I will check on that book by Lou Franklin.

I am aware of the nasty glue. Not too much on this board but I have been removing it. I will finish it the rest of the way when I replace the caps.

This morning I was watching the video from W2AEW on the RF probe.

Do you know where can I get a copy of the Sams manual #284 for this radio?

[QUOTE="RichardHartman, post: 749205, member: 54277"] Good afternoon, Yes I marked the original position and tried turning in both directions. It did not change any it stayed 1.74v. Then I returned it back to its original position. Thank you for the info on the 8719 and the cap kits. I will check on that book by Lou Franklin. I am aware of the nasty glue. Not too much on this board but I have been removing it. I will finish it the rest of the way when I replace the caps. This morning I was watching the video from W2AEW on the RF probe. Do you know where can I get a copy of the Sams manual #284 for this radio? [/QUOTE]

Top Bottom