You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

It is unreal the amount of bad advice there is coming from people. I read a thread on another forum where a senior member insists that the newbie uses LMR240UF for a standard FCC type Uniden PC78 LTW in a mobile. It was stated that RG58 wouldn't be a good idea to use. Ironically, I've seen this same member talking about how good the Wilson 1000 was (the Wilson 1000, of course, uses RG58).

With the .25 db gain on an 18' run, using a 4W radio....I can see S-meter needles bending now. I hope the poor guy don't waste $30 for .25 db.

[QUOTE="roadrage, post: 449096, member: 21185"] It is unreal the amount of bad advice there is coming from people. I read a thread on another forum where a senior member insists that the newbie uses LMR240UF for a standard FCC type Uniden PC78 LTW in a mobile. It was stated that RG58 wouldn't be a good idea to use. Ironically, I've seen this same member talking about how good the Wilson 1000 was (the Wilson 1000, of course, uses RG58). With the .25 db gain on an 18' run, using a 4W radio....I can see S-meter needles bending now. I hope the poor guy don't waste $30 for .25 db. [/QUOTE]

Top Bottom