You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Ok i will Give it a Go.. used a section of 4" pipe and was 4.25" wound the Coax Around it 5 turns and drilled 2 holes on Each end to hold coax tight also drilled 2 holes about 90deg around and used a zip tie to keep the balun tight and to the form! used part of the 75' RG213 to make it and have the Balun About 10" below the Antenna!

[QUOTE="xxjoker21xx, post: 760936, member: 14300"] Ok i will Give it a Go.. used a section of 4" pipe and was 4.25" wound the Coax Around it 5 turns and drilled 2 holes on Each end to hold coax tight also drilled 2 holes about 90deg around and used a zip tie to keep the balun tight and to the form! used part of the 75' RG213 to make it and have the Balun About 10" below the Antenna! [/QUOTE]

Top Bottom