Shadetree Mechanic
Delaware Base Station 808
I think that's normal. I will check my Anytone 5555.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Top Gun Quad 5
- Thread starter undertaker
- Start date
Mobile only:
NB on Sideband (is how I think of it).
On AM only: Experience is that as a function it doesn’t do all that much anyway. Maybe makes the hiss sound different (not less) so that listening isn’t as fatiguing.
The President Lincoln I recently bought seems more effective, but it’s the HI-CUT filter that “matters”.
NB on Sideband (is how I think of it).
On AM only: Experience is that as a function it doesn’t do all that much anyway. Maybe makes the hiss sound different (not less) so that listening isn’t as fatiguing.
The President Lincoln I recently bought seems more effective, but it’s the HI-CUT filter that “matters”.
I myself have not had a SSB radio where the NB/ANL didn't work. One good thing came out of this, narrowed my SSB noise problem, that I thought was coming from the fridge, to the inverter!
JD
JD
My ss6900 NB seems to work on ssb and its the same radio.
Shadetree Mechanic
Delaware Base Station 808
I checked my 5555, it is the same way. Doesn't seem to change the sound much on SSB maybe because the sound of the static is different? Not as big of a change as AM, but it does do a little something.
That's been my experience with mine. Overall a real nice radio. I wasn't sure about the orange display, but I like it! Have a few more things to do regarding common mode crap from antenna. Then I'm going to try a KLV-203 with it and see how it does on SSB skip.
I do like the 60 channel option via programming! Nice to be able to just spin the knob from 27.185 to the freeband channels without turning another knob. And the channel encoder works way better than a Stryker!
JD
I do like the 60 channel option via programming! Nice to be able to just spin the knob from 27.185 to the freeband channels without turning another knob. And the channel encoder works way better than a Stryker!
JD
Last edited:
Your right it dont do that much really, thats where the dsp speaker comes into play.
Bob's had them back in 2014 I went looking to see where I first saw them last time I was on and that is where! He used to do a Blog I think it was called Informer or CB Informer or something like that.
Has anyone tried a KLV203 with the Quad 5? I was thinking of giving it a whirl. Radio with RF power all the way down DK's 1.5 watts on AM. I had great luck with one of these amps behind a Galaxy77 years ago with the older style finals. Would these newer mosfets swing too much? I would primarily use the amp on SSB.
JD
JD
It will just depend on how much swing the radio has at low power. If you deadkey 1.5 and swing 10 watts, no problem. If you’re keying 1.5 and swinging 35-40 then don’t put a KL203 in there.
Shadetree Mechanic
Delaware Base Station 808
I think the swing on my Anytone 5555 drops down when the dead key is lowered with the power control on the front of the radio. I seem to remember running it with a 203 on the bench just to try it.
I have the anytone 5555 also. I find it to be a great radio. Always get good reports on the audio being clear. Made it into Sweden last Saturday night ( there was some skip running for about a half an hour about 23.30hrs) and my signal there was nil but audio was clear but low. Swedish chap was running a Ranger
2950. I was just running the radio barefoot through a silver rod on a 20 foot pole.
2950. I was just running the radio barefoot through a silver rod on a 20 foot pole.
Its also either a mark 1 or mark 2. The CRT company in France sell that radio as the SS 6900 which now puts out about 45watts or so. The one I have puts out about 25 watts. It does me!
Well, it's a little after the fact ,but I noticed bobs cb was still taking orders for these. How you like? I have an anytone at5555 and love it except for the fact that it has low audio. Maybe needs cp1 and md1?