You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thank you nomadradio I did get on utube and see the selector apart. On my 201a the channels 31-35 were the ones I would have to tap selector for them to work. It may not have been a good idea but I took off selector back and sprayed some WD40 in there to help clean and lube inside. Now it is working just like it should when on crystal select but when on manual and selector on 31-35 the vfo will not work. Turn channel selector to 36 up or 30 below vfo works fine. It can be used at least now. I want to do the VFO transmit mod.

[QUOTE="Jimbo165, post: 603036, member: 25981"] Thank you nomadradio I did get on utube and see the selector apart. On my 201a the channels 31-35 were the ones I would have to tap selector for them to work. It may not have been a good idea but I took off selector back and sprayed some WD40 in there to help clean and lube inside. Now it is working just like it should when on crystal select but when on manual and selector on 31-35 the vfo will not work. Turn channel selector to 36 up or 30 below vfo works fine. It can be used at least now. I want to do the VFO transmit mod. [/QUOTE]

Top Bottom