You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

ok, i will give it a shot.

i do know that co-locating all your grounds is a good idea to avoid ground loops so why not!

i mounted it on the right side of the radio towards the front (radio upside down).

this way, it was close to the mic connector, and seemed to be a good location.

i now see that the speaker is very close to the connectors on the TRB board.

where do other people mount them in the 29LTD/ PC78XL chassis?

thanks for the input guys,
LC

[QUOTE="loosecannon, post: 148585, member: 1368"] ok, i will give it a shot. i do know that co-locating all your grounds is a good idea to avoid ground loops so why not! i mounted it on the right side of the radio towards the front (radio upside down). this way, it was close to the mic connector, and seemed to be a good location. i now see that the speaker is very close to the connectors on the TRB board. where do other people mount them in the 29LTD/ PC78XL chassis? thanks for the input guys, LC [/QUOTE]

Top Bottom