You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Good job. It almost had to be something like that. Looking at the schematic the TX switch on the mic goes to pin 3, pin 3 goes to the CB/PA/MON switch and, assuming the switch is in CB position.... goes straight to the trigger side of the relay.

The hot side of the relay goes straight to the power switch and, if the radio has power, then the relay coil is hot.... not much else to go wrong.

Glad you found it.

[QUOTE="guitar_199, post: 698625, member: 18156"] Good job. It almost had to be something like that. Looking at the schematic the TX switch on the mic goes to pin 3, pin 3 goes to the CB/PA/MON switch and, assuming the switch is in CB position.... goes straight to the trigger side of the relay. The hot side of the relay goes straight to the power switch and, if the radio has power, then the relay coil is hot.... not much else to go wrong. Glad you found it. [/QUOTE]

Top Bottom