You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

[ATTACH=full]71631[/ATTACH]
That support wire will have to be kept damn tight and at a fairly sharp down-angle to allow the element wire to consistently unspool if going from say 10m to 80 or 160. And how would this system hold up in high winds?? Could the element end-weight flip around the support wire in a good t-storm?? If it does you're scuppered.

[QUOTE="Crawdad, post: 852321, member: 48522"] [ATTACH type="full"]71631[/ATTACH] That support wire will have to be kept damn tight and at a fairly sharp down-angle to allow the element wire to consistently unspool if going from say 10m to 80 or 160. And how would this system hold up in high winds?? Could the element end-weight flip around the support wire in a good t-storm?? If it does you're scuppered. [/QUOTE]

Top Bottom