You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Good thoughts wavrider, My question would probably be aimed more at a mobile application, a scenario where the antenna would be hardmounted to the roof of the vehicle. The feedline being connected with lug terminals, a little more difficult. I guess in this situation a balun would work fine? What I have done before is cut a piece of coax at approx 18 ft and swept it with a analyzer, clipping it till it reads 0 reactance, and 1.1. This way the analyzer dont see the coax, mabe this is not the best, but seems to work ok

[QUOTE="6.0 Liter, post: 248053, member: 6636"] Good thoughts wavrider, My question would probably be aimed more at a mobile application, a scenario where the antenna would be hardmounted to the roof of the vehicle. The feedline being connected with lug terminals, a little more difficult. I guess in this situation a balun would work fine? What I have done before is cut a piece of coax at approx 18 ft and swept it with a analyzer, clipping it till it reads 0 reactance, and 1.1. This way the analyzer dont see the coax, mabe this is not the best, but seems to work ok [/QUOTE]

Top Bottom