You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

i think it would work

but how well remains to be seen.

the object on the lower right with a black ring around it acting like a plug into the existing so239.

the other two rings in the picture also screwing on to the existing so239- securing the center contact, then add antenna...remains to be seen how well per your experience.

if ham city is nearby i would stop by and ask to see the kit.
also if a gap is produced as suggested by doc, then make a seal and use silicone,don't want to short to ground in the rain.

[QUOTE="gamegetter, post: 358837, member: 14621"] [b]i think it would work[/b] but how well remains to be seen. the object on the lower right with a black ring around it acting like a plug into the existing so239. the other two rings in the picture also screwing on to the existing so239- securing the center contact, then add antenna...remains to be seen how well per your experience. if ham city is nearby i would stop by and ask to see the kit. also if a gap is produced as suggested by doc, then make a seal and use silicone,don't want to short to ground in the rain. [/QUOTE]

Top Bottom