You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Loosecannon is right, you can do it with out the crystal change and either way you go you will need a freq counter to verify what freq is on each channel so you will know where you are at and the radio will need to be aligned to get it on freq after the channel mod is done to it.
tools needed.
freq counter
volt meter
scope.
this is the bare minimum needed to do it right.

[QUOTE="sonoma, post: 436097, member: 756"] Loosecannon is right, you can do it with out the crystal change and either way you go you will need a freq counter to verify what freq is on each channel so you will know where you are at and the radio will need to be aligned to get it on freq after the channel mod is done to it. tools needed. freq counter volt meter scope. this is the bare minimum needed to do it right. [/QUOTE]

Top Bottom