You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I could not apply the required torque with the supplied (short) spanner wrenches to obtain a zero gap between the mechanical fittings. The thickness of the nickel-plated fittings made it difficult to use SAE or Metric wrenches. Going against my mechanical mind set, I had to use (cringe) two adjustable wrenches to tighten the connections to obtain a zero gap. I verified the zero-gap using a flashlight and a 001" feeler gauge. Tomorrow is installation day.

[QUOTE="Recon, post: 801194, member: 55589"] I could not apply the required torque with the supplied (short) spanner wrenches to obtain a zero gap between the mechanical fittings. The thickness of the nickel-plated fittings made it difficult to use SAE or Metric wrenches. Going against my mechanical mind set, I had to use (cringe) two adjustable wrenches to tighten the connections to obtain a zero gap. I verified the zero-gap using a flashlight and a 001" feeler gauge. Tomorrow is installation day. [/QUOTE]

Top Bottom