You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I fixed it.
I worked on the black plastic PPT button a bit, and I removed the "clickey" which is held down with adhesive tape, cleaned with alcohol, and scratched it up, button and board, to make better contact. The speaker wire was just hanging on by one strand of stranded steel wire, so I had to touch that up with a solder fix. The squelch drop button didn't work right when I was done, and I ended up rerouting the speaker wire and the issue went away. Not sure what that was about but it's 100% operational now and the PPT feels a lot better. Not the best. But doesn't require crush level effort for sure.

[QUOTE="Tom Line, post: 816421, member: 61660"] I fixed it. I worked on the black plastic PPT button a bit, and I removed the "clickey" which is held down with adhesive tape, cleaned with alcohol, and scratched it up, button and board, to make better contact. The speaker wire was just hanging on by one strand of stranded steel wire, so I had to touch that up with a solder fix. The squelch drop button didn't work right when I was done, and I ended up rerouting the speaker wire and the issue went away. Not sure what that was about but it's 100% operational now and the PPT feels a lot better. Not the best. But doesn't require crush level effort for sure. [/QUOTE]

Top Bottom