You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

It's a pain in the ass without the cable but it is doable.

Where is says key there's supposed to be a pic of the up/down arrows, so you use the up/down to "scroll"
Do this:

Press [MENU] + 7 + [MENU]    Use the key to select "dual-watch OFF"
Press [MENU] + EXIT To accept and exit

Press [MENU] + 1 + [MENU]    Use the key to select 5.0 KHz Step
Press [MENU] + [EXIT] To accept and exit

Once that's done you don't have to do it again.

Then:
Enter 146 985 The receive frequency

Press [MENU] + 25 + [MENU]    Use the key to select Minus Offset (-)
Press [MENU] + [EXIT] To accept and exit

Press [MENU] + 26 + [MENU]    Use the key to select 00.600 MHz Offset
or use Keypad and enter 00600 MHz Offset
Press [MENU] + [EXIT] To accept and exit

Press [MENU] + 1 + 3 + [MENU]    Use the key to select 100.0 Hz Tone
or use Keypad and enter 1000
Press [MENU] + [EXIT] To accept and exit

You should now be able to activate the repeater.... if you want to save the repeater to memory do:

Press [MENU] + 2 + 7 + [MENU]    Enter 010 or Use the key to select 010
Press [MENU] + [EXIT] This stores the Receive Frequency

Press [*SCAN] (quick press)    Display will show Transmit Frequency (146.385)

Press [MENU] + 2 + 7 + [MENU]    Enter 010 (if required)
Press [MENU] + [EXIT]    This stores the Transmit Frequency

Got that from Baofeng UV5R Buddy's QPG UV-5R it works for me.

<blockquote data-quote="desync0" data-source="post: 386107" data-attributes="member: 16071">It&#039;s a pain in the ass without the cable but it is doable.Where is says key there&#039;s supposed to be a pic of the up/down arrows, so you use the up/down to &quot;scroll&quot;Do this: Press [MENU] + 7 + [MENU]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Use the key to select &quot;dual-watch OFF&quot;Press [MENU] + EXIT&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; To accept and exitPress [MENU] + 1 + [MENU]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Use the key to select 5.0 KHz StepPress [MENU] + [EXIT]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; To accept and exitOnce that&#039;s done you don&#039;t have to do it again.Then:Enter 146 985&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; The receive frequencyPress [MENU] + 25 + [MENU]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Use the key to select Minus Offset (-)Press [MENU] + [EXIT]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; To accept and exitPress [MENU] + 26 + [MENU]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Use the key to select 00.600 MHz Offset&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; or use Keypad and enter 00600 MHz OffsetPress [MENU] + [EXIT]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; To accept and exitPress [MENU] + 1 + 3 + [MENU]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Use the key to select 100.0 Hz Tone&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; or use Keypad and enter 1000Press [MENU] + [EXIT]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; To accept and exitYou should now be able to activate the repeater.... if you want to save the repeater to memory do:Press [MENU] + 2 + 7 + [MENU]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Enter 010 or Use the key to select 010Press [MENU] + [EXIT]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; This stores the Receive FrequencyPress [*SCAN] (quick press)&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Display will show Transmit Frequency (146.385)Press [MENU] + 2 + 7 + [MENU]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Enter 010 (if required)Press [MENU] + [EXIT]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; This stores the Transmit FrequencyGot that from <a href="http://www.miklor.com/uv5r/UV5R-BuddysQPG.html" target="_blank">Baofeng UV5R Buddy&#039;s QPG UV-5R</a> it works for me.</blockquote>

[QUOTE="desync0, post: 386107, member: 16071"] It's a pain in the ass without the cable but it is doable. Where is says key there's supposed to be a pic of the up/down arrows, so you use the up/down to "scroll" Do this: Press [MENU] + 7 + [MENU] Use the key to select "dual-watch OFF" Press [MENU] + EXIT To accept and exit Press [MENU] + 1 + [MENU] Use the key to select 5.0 KHz Step Press [MENU] + [EXIT] To accept and exit Once that's done you don't have to do it again. Then: Enter 146 985 The receive frequency Press [MENU] + 25 + [MENU] Use the key to select Minus Offset (-) Press [MENU] + [EXIT] To accept and exit Press [MENU] + 26 + [MENU] Use the key to select 00.600 MHz Offset or use Keypad and enter 00600 MHz Offset Press [MENU] + [EXIT] To accept and exit Press [MENU] + 1 + 3 + [MENU] Use the key to select 100.0 Hz Tone or use Keypad and enter 1000 Press [MENU] + [EXIT] To accept and exit You should now be able to activate the repeater.... if you want to save the repeater to memory do: Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the key to select 010 Press [MENU] + [EXIT] This stores the Receive Frequency Press [*SCAN] (quick press) Display will show Transmit Frequency (146.385) Press [MENU] + 2 + 7 + [MENU] Enter 010 (if required) Press [MENU] + [EXIT] This stores the Transmit Frequency Got that from [url=http://www.miklor.com/uv5r/UV5R-BuddysQPG.html]Baofeng UV5R Buddy's QPG UV-5R[/url] it works for me. [/QUOTE]

Top Bottom