You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I already checked/recheck to make sure that I didn't have R1 & R2 reversed. The primary current consumption on this circuit is a transistor that has a maximum collect current rating of 70mA.

Is this just a case of using too much resitance and it's causing a ton of voltage drop under load as a result? Perhaps if I picked up some small value ohm resistors?

[QUOTE="Moleculo, post: 151788, member: 1"] I already checked/recheck to make sure that I didn't have R1 & R2 reversed. The primary current consumption on this circuit is a transistor that has a maximum collect current rating of 70mA. Is this just a case of using too much resitance and it's causing a ton of voltage drop under load as a result? Perhaps if I picked up some small value ohm resistors? [/QUOTE]

Top Bottom