I am looking to purchase the PC boards shown in the attached photo. Help anyone
- 399
- 399
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
WHERE CAN I PURCHASE THESE??
- Thread starter unit_399
- Start date
There was a guy that went by X Bones that was making them but I have no contact info.
In your picture above the one on the right is a uniden board used in the Lincoln radios to replace the MRF 477/497.
Maybe a UK based radio service would have replacements?
The one on the left looks home brew to me.
I will dig around some more and see if anything else pops up.
73
Jeff
In your picture above the one on the right is a uniden board used in the Lincoln radios to replace the MRF 477/497.
Maybe a UK based radio service would have replacements?
The one on the left looks home brew to me.
I will dig around some more and see if anything else pops up.
73
Jeff
Here is a better picture of the uniden board, with the board number.
Pinout along the bottom of the Uniden board is correct as a drop-in for MRF477. Emitter lead in the center.
Not the correct config for a 'CB' final with the collector as the center lead.
73
Not the correct config for a 'CB' final with the collector as the center lead.
73
have you tried RF PARTS company? i got some oddball stuff from them like that before
phone 760 744 0700. every time ive called i got a nice intelligent person on the other end
phone 760 744 0700. every time ive called i got a nice intelligent person on the other end
Shadetree Mechanic
Delaware Base Station 808
Kens has a lot of older pieces and parts. They often have lots of stuff not listed on the website. Could possibly send them an email inquiring about the part.
CB Radio Repair Service Manuals at Ken's Electronics, (Wholesale & Retail Electronic Parts) Kalamazoo, Michigan
Howard W. Sam's Photofact CB Radio Books are available from Ken's Electronics, (Wholesale & Retail Electronic Parts) Kalamazoo, Michigan at reasonable prices
www.kenselectronics.com
Chris -
The board number is PB288AA. I did an extensive search and found nothing. Also tried RF PARTS, Ken's electronics, etc., also zip.
I think I'll just draw up a pc board design and have a local PC board shop make me a few. Thanks 73.
JIM
The board number is PB288AA. I did an extensive search and found nothing. Also tried RF PARTS, Ken's electronics, etc., also zip.
I think I'll just draw up a pc board design and have a local PC board shop make me a few. Thanks 73.
JIM
JJ, look at this thread, Andy posted some good pictures of the board used in the Connex, and some circuit diagrams that may be helpful.
Also the boards by X bones, it has a 2020 date on it.
www.worldwidedx.com
Also the boards by X bones, it has a 2020 date on it.
2sc2290 in a connex or galaxy
Years back there was a site on the internet that showed how to remove the final on a galaxy/connex and replace it with a 2sc 2290. Did anyone happen to save that info? It does not seem to show up anymore. Thanks
Shadetree Mechanic
Delaware Base Station 808
JJ I sent you a PM.
I also invited the gentleman to the forum, maybe he will come over and say hello.
73
Jeff
I also invited the gentleman to the forum, maybe he will come over and say hello.
73
Jeff
Last edited:
Shadetree Mechanic
Delaware Base Station 808
He has them listed for sale on Facebook marketplace.
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Is this x-bones that some of us bought the variable power boards from?He has them listed for sale on Facebook marketplace.
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.