• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

I am using the 300 Ohm sold by DX Engineering...Much better than the 450 LL in wet conditions, only need to "tweak" it when raining. Seems also to be very stable, wide bandwith. Tune at 3865 and can go from 3840- 3900 and never have to "tweak" it.

Reminds me of the BELDEN kw twin lead they sold for Military use back in the 70- 80's.

I like it much better. I used (2) of DX Eng. 80-10m Doublet kits to build it and had a big chunk of the 300 line left over(y) Those "T" bar insulators are GREAT!




YEP your right...Half twist!:confused:




Yes, even at 40-45 ft it's HOT West & East (best West)....

However HOT off the corners also SW to NE and NW to SE...(ask Wavrider how it gets into FLA. from IND.)

BIG  on 40 meters down under(ask VK rules!) and HOT into Europe and Northern Russia.(Smokes into Europe /Africa on 17m!!!)

I think if it was higher I would lose the corners, but maybe not?


Never run it through the EZNEC  or any other antenna software, but be interesting to see! 


Well that's the skinny...Good Luck, if you try one!

I would be interested in your perspective, after you've had it up 3-4 months down the log:)

All the Best

Gary