You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

About ready to pull my hair out here. I'm slowly learning the ropes for cb radio restoration. My problem now is that the colors of the wire on my mic don't match the colors in most wiring diagrams. The colors of the wires on my mic are red, violet, white (with a black covering), and the shield (bare copper). How do I wire the 4 pin plug with these colors? Be patient, I'm learning more every day. I'm using the mic on a Cobra 19 DX III.

[QUOTE="danmcclain, post: 775870, member: 59987"] About ready to pull my hair out here. I'm slowly learning the ropes for cb radio restoration. My problem now is that the colors of the wire on my mic don't match the colors in most wiring diagrams. The colors of the wires on my mic are red, violet, white (with a black covering), and the shield (bare copper). How do I wire the 4 pin plug with these colors? Be patient, I'm learning more every day. I'm using the mic on a Cobra 19 DX III. [/QUOTE]

Top Bottom