You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Robb I would also think the 1/4 wl would be the correct length but looking at Eddie's EZNEC graphs makes me re-think that.

I will wait for Eddie or Bob to post as to what length and how much angle if any for the counterpoise.

I only plan on putting that antenna on top of the tower one time so I want to get the best performance I can out of it.

Then again I could always put the spare hazer on that tower and just crank it up and down, the only down fall to that is I would be limited to three radials instead of four due to the hazer/tower.

[QUOTE="wavrider, post: 367645, member: 9893"] Robb I would also think the 1/4 wl would be the correct length but looking at Eddie's EZNEC graphs makes me re-think that. I will wait for Eddie or Bob to post as to what length and how much angle if any for the counterpoise. I only plan on putting that antenna on top of the tower one time so I want to get the best performance I can out of it. Then again I could always put the spare hazer on that tower and just crank it up and down, the only down fall to that is I would be limited to three radials instead of four due to the hazer/tower. [/QUOTE]

Top Bottom