You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

So not to poke a dead horse, but a couple of suggestions.

1. Make sure your feedline is tuned to 27.2 (or whatever freq. is your target freq.). This is easily done with your network analyzer.

2. I have found that on the Workman, I have better success with reversing the direction of the ring.

3. Make sure to adjust the bottom joint, not the top one. The larger diameter will give you a broader SWR band.
.

[QUOTE="Dr_DX, post: 774235, member: 1260"] So not to poke a dead horse, but a couple of suggestions. 1. Make sure your feedline is tuned to 27.2 (or whatever freq. is your target freq.). This is easily done with your network analyzer. 2. I have found that on the Workman, I have better success with reversing the direction of the ring. 3. Make sure to adjust the bottom joint, not the top one. The larger diameter will give you a broader SWR band. . [/QUOTE]

Top Bottom