• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Yaesu ft990 not transmitting in USB

mr_fx

Sr. Member
Oct 8, 2011
1,536
172
173
Kansas City
It just started doing this today no warning no unusual things happening basically all other modes work lower side band works just fine as soon as you key down on upper side band it throws out the quick blip and then it says busy and the display flickers and it just kind of goes on and off and on and off and on and off
 

Any resolve to this?? Just curious? Did you try a CPU reset as stated by w9cll?? And also I heard you say you had some RF feedback, so cheek all coax jumpers and connections.
May not seem like it would take out only one mode, but ya never know!! Hope you get it fixed. Have a good one!!
 


Write your reply...
dxChat
Help Users
  • No one is chatting at the moment.
  • @ Geoexplorer69:
    Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
  • @ Geoexplorer69:
    Is 30 ohms worth worrying about in a 100’ run of rg8u ?


      You do not have the permission to use the chat.