You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

If you're taking the water resistant barrier off and planning on installing the bluetooth, you should do so at that time. The only way you'll get it off with tweezers is to destroy the resistor. You might be able to get it done that way, but I wouldn't recommend it. I have talked to people that use a set of small needle nosed pliers to crush these resistors also. It's your radio...be careful

[QUOTE="Moleculo, post: 199771, member: 1"] If you're taking the water resistant barrier off and planning on installing the bluetooth, you should do so at that time. The only way you'll get it off with tweezers is to destroy the resistor. You might be able to get it done that way, but I wouldn't recommend it. I have talked to people that use a set of small needle nosed pliers to crush these resistors also. It's your radio...be careful :D [/QUOTE]

Top Bottom