-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!
meanwhile out in the garage ...
- Thread starter kopcicle
- Start date
Top box. I was running out of room.
https://www.lowes.com/pd/CRAFTSMAN-...egSov0d3R5RX9o5ucBxoC3tAQAvD_BwE&gclsrc=aw.ds
Last edited:
gcode and the original artwork may be available on request. It depends on how good your manners are and how convincing the request is.
At 6 x 2.5" and a .030" endmill @ 33 inches per minute and 72,000 lines this is not a beginners project.
Kop you sure do so high tech stuff in your garage that I can’t even pretend to understand. I tend to bumble around with ancient technology, and bring old stuff back to life.
Major Reginald V. Shepherd and Harold Turpin, and EN for Enfield
this example more of an MP 3008 copy...
this example more of an MP 3008 copy...
Last edited:
It’s not in the vertical like an MP3008, just folded into storage position and mag in.
But...the MP3008 is definitely the one to copy of one wants an “authentic looking” vertical Sten.
Few people today even know what the MP 3008 is!
Going to do a carbine on the MKIII, but they do look stupid with the long barrel...except the MKIIS...that’s pretty cool.
Last edited:
- No one is chatting at the moment.
-
-
-
@ Geoexplorer69:Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
-
-
