• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

11 meter is very quiet?

Been hearing a lot of activity on the radio but been in full swing of summer tear down and winter prep. But I did take the time to open the KL-203 P and spray the switches with contact cleaner because I gotta get it ready for my 2 Hr. road trip this week so it is a reinstall tomorrow. And the trees keep getting bare !
 
did get a few dx moments on 22 then 31 then avoided 33 to 40.went 1 click above n hit scotland. later on 27.48500 lsb got several west coast contacs as the usual bunch of us were at the gathering of the minds
 
Finally seeing the light at the end of the tunnel. Got my new workbench completed, and started putting things back in order. Gonna try to get back on the air later today. 37LSB.

- J.J. 399
glad you got it reset up. more so that you n family survived. maybe someday we might connect on the air.
operator bob in southwest mo, the weakest station in the nation
 
glad you got it reset up. more so that you n family survived. maybe someday we might connect on the air.
operator bob in southwest mo, the weakest station in the nation
Thanks Bob -
Appreciate the kind words. It felt good to finally fire up the old Cobra again. I know we'll hook up soon.
73 my friend.
- J.J. 399
 
I hooked my station up, but when I keyed up, my amp's relay chattered. I thought the ssb delay cap had failed. Opened up the amp and it checked good. Looked over the delay circuit, and found a bad solder joint from the common pole on the am/ssb switch to the main board. The amp sometimes gets hot as hell when I get to ratchet-jawing. I think this weakened the joint since the amp has been running perfect for many months. Resoldered and working 100% again.

J.J. 399

solder.png
 
I hooked my station up, but when I keyed up, my amp's relay chattered. I thought the ssb delay cap had failed. Opened up the amp and it checked good. Looked over the delay circuit, and found a bad solder joint from the common pole on the am/ssb switch to the main board. The amp sometimes gets hot as hell when I get to ratchet-jawing. I think this weakened the joint since the amp has been running perfect for many months. Resoldered and working 100% again.

J.J. 399

View attachment 70577
stitch in time
radio is fine
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Mark Malcomb:
    Hello BJ. Been a long time since I've been on. You doing well? Mark Malcomb
  • @ Naysayer:
    I’m
  • @ kingmudduck:
    Hello to all I have a cobra 138xlr, Looking for the number display for it. try a 4233 and it did not work