Search results

If it is anything like the Randy handheld, you will have better luck hanging your head out the window and hollering to the passing driver.

Just to clarify the radio I am using for testing is a Galaxy. Also: 1st reed on right- Red wire from the element. 2nd reed from right- Red wire from cord. 3rd reed from right- Green wire from cord. 4th reed from right- White wire from cord. Black wire from cord goes to the element.

I have a NOS Shure 577C that I am trying to wire for a 4 pin Cobra/Galaxy and have ran out of hair to pull out. So far the closest I have gotten is the following: 1-black, 2-green and black, 3-white, 4-red. This will key the radio but there is no audio. 1-black, 2-green, 3-white and black...

Nomad, here is the Specs that were in the box with the J450C. They did make two versions, one for relay switching and one for electronic. Like all Turner mics the added J meant electronic. It sounds fine to me on my monitor, will using it damage the radio?

I recently picked up two NOS Turner mics that look very similar on the outside but are different inside. These things are built like tanks. I have re-wired both to 4 pin Cobra/Galaxy and they sound good to me on the air. The LMM Landcom mics were originally made as direct replacements for...

Based on the info on the web site, the guy from Alabama does not own Tin Man any longer, the name was bought and being re-launched by 417amps.

Is anyone using any of the Shure handheld mics? Just looking for information/opinions on what model(s) to try. I have been seeing models like the 405, 414 and 577. I appreciate any input. Thanks.

Do not know if it will help, but on my 2970 when you change the channel you need to key the mic for the radio to remember that channel. If you do not key up and turn the radio off, it will not be on that channel the next time you turn it on.

Skip I replied to your message. Thanks.

How could there be any expectation of privacy on an open frequency?

Jumbo it is the original, so I guess a V1. $350 plus shipping. It is new in the box.

Nomad, this picture is the one I wired that seems to work. The cord shield is soldered to the band at the bottom of the board, there is a black jumper from that to the 4th (far right) post. Are you saying to move the jumper to the 3rd post and move the red wire from under the ptt to the 4th...

Anything that uses the standard Cobra 4 pin connector. Nomad I also edited, I attached the wrong picture. Sorry for the confusion.

I have several Turner hand mics and want to put new cords on them and wire them to work with the newer radios. When taken apart, there is all sorts of variations on how they are currently wired. Can anyone please tell me if the mic wiring labeled in the photo looks right? That is the old cord...

Sorry RollingStone, it is sold. Thanks for asking.

Yes, from that original list I still have: Ranger 2970n2 (green display with black numbers) Ranger 2950DX (black display with green numbers) RCI 3900HP Stryker 955 version 1 President Lincoln (original) HR2510 Emperor 5010 Just let me know. Thanks.

Hey guys, I replied back. Still alive. Lol.

I had a pickup that I could never tune with the Wilson 1000 and 62” whip. Finally bought the 66” whip and was able to dial it right in. This was mounted on the roof but closer to the back. The ribs in the roof prevented placing it in the center. But that is the only time I ever needed the longer...

They have them shown here. https://www.cobra.com/products/29ltd

Geez…I hope they didn’t “rebuild” anything inside the mic.