Search results

Hi, I now it will work but there are 3 versions of the 90-1 which have 3 different frequencies, I need the one that is 11.990 so not sure if the others will work. Thanks, Adam

Hi, I have a Pace 1000B 23 channel, you are saying the Siltronix VFO-1 will work in it? Thanks, Adam

OK thanks, was hoping to get lucky and have someone who had the same AM problem and knew the component(s) but such is life. Thanks again for your help. Adam

Wow, I think I am going to take a baseball to this one! So when I got it yesterday it had NO am transmit (did key) but SSB was fine. I tried adjusting VR17 but no luck and then after a while I tried it again and it had about 3 watts out on AM. I adjusted VR-17 to about 4 watts out so I confirmed...

Thanks, many help appreciated. If not I will put it aside for a while. Thanks, Adam

Yes, understood and I agree, I would never pull wires unless I am sure but the SecretCB is different then the mess I have here. I greatly appreciate your comments and still hoping for someone who has the Stalker Two and can send pics. Thanks, Adam

The radio had 2 switches added and to make things worse on one of the switches the 2 wires were not attached to it and hard to tell which 2 inside were attached so I have to do some playing. I would still rather put it back to stock if possible. Thanks, Adam

Hi, thanks, I did and they seem to be totally different but thanks, Adam

Hi, thanks for responding. Unfortunately I don't see the Stalker II (TWO) listed there. Adam

Hi Donny, I just got a Teaberry Stalker II 23 channel and found that someone ran a few wires and switches to the channel selector control so wondering if you can possibly take pictures inside the radio of the control so I can see the color code of the wires and put it back the way it should be...

Hi all, I just got a Teaberry Stalker II 23 channel and found that someone ran a few wires and switches to the channel selector control so wondering if anyone has the same radio and can possibly take pictures inside the radio of the control so I can see the color code of the wires and put it...

Yes, that's it. Adam

Hi all, before I put it back on the shelf I tested it once more, it is the relay buzzing when I key up. Again, the relay is fine so it is something else. Thanks, Adam

Hi all, yes, I am thinking it is a cap but was hoping I would be lucky enough to run across someone who had the exact same problem. Oh well, back on the shelf, thanks, Adam

Hi all, I have a Courier 23+ in Excellent shape, was sitting on the shelf for a few years and was working but went to try it and it won't key up. Receive is fine but won't transmit. When I key the mike it makes sort of a buzzing noise but will not key. It is NOT the mic (works on another Courier...

Hi Exit Thirteen and all who are reading this, thanks to ExitThirteens GREAT help I did the delay mod and it is PERFECT. Xforce finally did answer me and was very nice and sent me a diagram but of course I already had ExitThirteens help so I was all set. Thanks again! Adam

I am actually out of town till next weekend but will do it then and advise, you have gone above and beyond!! Adam

ExitThirteen, I can not thank you enough, you are a good and kind human being! Thank you very much! Adam

HI, as mentioned in my post Xforce does not answer. I have e-mailed them, texted them, and even called them for a couple of days, no answer. Anyone familiar with the relay and can help? Thanks, Adam

Hi, thanks for the post. I understand all that but was hoping someone could tell me which lead is the positive post according to the picture I posted of the relay. Thanks, Adam