• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Search results

  1. redbeast

    1)2 wave vertical dipole

    Strikes me now I probably should have posted in the cb antenna section, my bad haven't been around for a while
  2. redbeast

    1)2 wave vertical dipole

    My info and research to date sez that I shouldn't need a choke or balun, as the antenna should be about 75 ohms, with a 50 ohm feed. Is that about right?? Nothing fancy, just straight ole 11 m dipole, right?
  3. redbeast

    1)2 wave vertical dipole

    Thanks for the input ....I was planning on 11 m to start out. Had thought about dissimilar metals, but figured if I used stainless turnbuckles and thick wire and soldered the wire to the buckle it would probably work. The other end of the buckle would be insulators, top to a pulley, and bottom...
  4. redbeast

    1)2 wave vertical dipole

    So I'm thinking of setting up a cheap easy base at the house, and have been researching starting with 1/2 wave vertical dipole. If my figuring is right, the dipole will top out right around 800 feet in elevation, with the base about 10' off the ground, and top about 30 feet up in a pine tree off...
  5. redbeast

    Base New base antenna

    Undertaker..I live in the northeast and have been thinking about that tornado, is it rugged? We haven't had severe winters for a bunch of years now, but like anything else that will change. I've been using a sirio 5000 on my truck, and am impressed, would like to get similar results from a base...
  6. redbeast

    A question on whips...

    Kind of have to agree with Greg here, have had my 102 whip since the seventies on many different vehicles, always with swivel base and spring. Swr almost always about 1.4-5:1, setup on my ram with breedlove mount and an extender.......102 plus 4 for spring plus about 2 for extender.....swr came...
  7. redbeast

    Maybe......just maybe

    Ok, that makes sense. As a matter of fact, that's how I have my setup now, but the idea struck me, but as I had never heard anyone mention it or discuss it specifically figured can't hurt to ask. Only stupid questions are the ones you don't ask. Thanks guys ...73s.
  8. redbeast

    Maybe......just maybe

    Figured maybe I'd route I through my stereo....free amplifier!!! Point is, these guys run in ground circuit of coax, yes??? Just wondering.
  9. redbeast

    Maybe......just maybe

    Alright guys, was thinking the other day. Always talk about grounding to binding etc for good antenna performance. Has anyone ever used lightning protection so239 couplers, and bolted/ welded the to car/ truck frame, body, etc. Dawned on me this might be an idea. Don't figure the would be a lot...
  10. redbeast

    Mobile Ram 1500 antenna

    Yeah, see you have the ram box, if you look at mine you won't have to remove the plastic, the bullring setup uses a router bit with bearing, and a small sawblade, when you're done the stake pocket hole is perfectly cut, and the breedlove with the 4vdegree angle makes antenna sit nice and...
  11. redbeast

    Mobile Ram 1500 antenna

    My breedlove mount was excellent, got a passthrough with so239 for the whip, and another for the base of the sirio. Think the mount was like 1 3/4" or so I length. Bullring makes a kit to cut the plastic cover on the bed, cheap and works great with a standard router. I sent pic of 192 whip with...
  12. redbeast

    Mobile Ram 1500 antenna

    Can send in newer photos if you'd like. The 102 with the spring tuned in real well with a 2-3" extension....swr almost flat
  13. redbeast

    Mobile Ram 1500 antenna

    Hey Nick, I have a 2012 ram and am using a breedlove pocket mount (4 degree) with a sirio performer be 5000. Coax runs inside bed and into compartment under rear seat thru existing plug. Have a low garage, so works fine getting under 7 foot door. Swr is at 1.1:1---1.4:1 after tuning, have yet to...
  14. redbeast

    President John Q

    Thanks Robb, good to know.Whats the chances that the channel selector is fudged up enuff to affect the led display? This unit has been obviously sitting around in a poor environment, but everything xcept the led seems to work, it was hard to make out whether the segments were dim or not when I...
  15. redbeast

    President John Q

    Thanks, Dmans. Got the unit for free and not real familiar with the president line.
  16. redbeast

    President John Q

    Does anyone have any input on the president John Q model? Just picked one up for free, initial test shows it turns on, tx/rx light operates, but no LEDs on in display. Good radio? Approximate age? Were the president's made by uniden? Any input would be appreciated. Thanks guys. 73
  17. redbeast

    Looking for a good tech that does good work on the Grant Xl

    I called Mikes recently and a woman answered said Mike was out of business. ?,???Fyi??
  18. redbeast

    Vintage Homebrew Antenna

    Homerbb...imho, looks like an early attempt at an electric chair, or the first mobile antenna...it would roll along behind your horse and buggy!!!!
  19. redbeast

    So Long, Everybody

    Riverman, glad to see you changed your mind. Being the same age, I get why you were leaving..........if I may, bear this in mind. God made your shoulders rounded so the s### would roll off!! Works well for me. Gotta say that most of the members on here are worthy of praise, and have helped me...
  20. redbeast

    Oldie but a goodie???

    Guessing this is a 23 channel unit, or am I wrong? Ad sez it talks " loud", which I suppose could mean anything.Would $100 for that radio and the d104 be in the ballpark?