Search results

Dont know if this might work Moleculo but you can always go over the specs SH-95 [COM-SH95] - $45.00 : Radioworld

Your Pick up Bed may have rubber mounts between the bed and frame rails, you could start by sanding the paint where youre flatbar mounts to the bed, then use two pieces of grounding strap or thick gauge electrical wire. where the cab meets the bed on the underside clean off a spot on each...

Why don't you just use one 102 in the center with a 6 inch spring and ground the bed to the frame with a grounding strap on both sides of the frame? seems much simpler to me, unless it's for the look? my .02

hehehe he grinded a gear at 3:50 ish :P

Well KA5ROW, you have many good points but also a somewhat flawed view, personaly speaking I'd rather have someone with technical knowledge sell me a radio then some fruit cake that hacks it up and say poetically "It's Loud , on about 5 adjacent channels +&-, but it's loud!!". Not long Ago...

Here ya go rob scroll down to the president section of this page, NW CB RADIO it say's adjust VR5 or cut D14 for modulation and then adjust L15 L12 L11 for Am power hope this helps you.

I've got one of those (wood grain one) works pretty well, although the rubber lip guard is glued on and easy to break off and the slide in PTT button when it gets used does not push in as fluidly. Can't really compare it to other noise cancelling mics as that my only one, oh and its quite...

Thank you for clarifying this waste of money, just in case anyone were to be conned into buying it lol. As for the drilling part i will have to wait till the extended warranty is up on the car only problem is that I have a sun roof, so for the moment it's in the center of what sheet metal is...

I was browsing ebay ealier this morning and stumble on a "Ground plane kit" which consist's of six radials of 6" long. Wilson 5000 or Wilson 1000 Antenna Ground Plane Kit Now for the question, can this be beneficial in creating a better ground plane or is this just another bogus hype...

Building your own computer with parts that You want i emphasize YOU want is a far better choice than buying prebuilt like rob said, as for windows 7 it seemed far less buggy than vista but i woul still stick with XP pro and when Microsoft finally figures out the bugs and compatibility issue's of...

Clock speed basically means that the instructions sent to it are processed faster, seeing as it is a 45 nm chip and already uses less power and produces less heat that larger 60+ nm chip overclocking it makes it run 10-15 F warmer but should not harm it at all, also the nice thing about...

Dont bother with that AMD system as they dont specify the actual motherboard used, the Q8300 overclocked is better that the other 2 Intel systems Cpu is 45 nm good powersupply good video card good motherboard more than enoguh ram andits already overclocked with a 3 year Warranty. ( in...

Well like moleculo says Amd/Intel that choice is up to you Im an AMD guy and that 4th link for the Intel Q8300 overclocked is very eye catching from my perspective, the AMD system on the other hand you would only benefit from that 8 gigs of ram if your using as moleculo stated, Windows Vista 64...

This might be long but ill give it a shot, seeing as you will be using programs mainly for burning music and not gaming you dont need a very quick Graphics card, as for ram depending on the operating system you will be using id say minimum 3 gigs Dual Channel. Next for a cpu I would recommend...

When you check your SWR you have to recalibrate the meter after every check. 1: Key mic set the needle to the very far right so it lines up with the CAL line, with the mic still keyed slide switch from cal to swr, take reading repeat step on ch 1 -20 - 40. Always recalibrate when testing...

Happend to stumble across this link with a radio install for a hummer , from the pics it seems to be a H1 but at least it might give some ideas as to mounting/ installing your radio. CB Installs hope it helps.

yup on my way from the mall i was picking up quite alot of banter from illinois ny alabama louisiana texas all the way up here in montreal with moleculos harley davidson cb i purschased from him not long ago btw mole its works awsome :D lota compliments on the clarity with a stock mic and the...

For starters if you have an Nvidia video card and depending on what kind of monitor you are using you should in most case be able to use at least 1280x1024 unless its some old arsed 13 inch crt from back in the early 90's lol For starters make sure your video drivers are up to date...

Easy solution just increase you screen resolution Right click desktop>Properties Under the settings tab, bottom left side is a box with a resolution, most of the time defualt is 800x600 32 bits. Increase this setting until desired . note for crt monitors try to keep a 4:1 aspect ratio...

they seem to be spares as i took apart a stock mic and those two same wires were cut, managed to figure it out and go it working, swaped post 1&2 and 3&4. thanks for your opinion.