Search results

Is the end of days tied into the Sun? Armageddon Video Gallery another video http://link.history.com/services/link/bcpid3887230001/bctid4447721001

Seriously I was a hair shy of going off on that dude about his Obama, and racist rants...:angry: Damit Man. Take your moaning and crying and the sky is falling bull elsewhere:headbang

Look here Harbach Electronics - Other Parts or http://www.mouser.com/Search/Refine.aspx?N=2203862+4294627190+4294572338+4294401343&Keyword=220UF&FS=True

Ok I got the 101e in. hooked it up moved the the band switch to 11 meters. Guess what it hears but no transmit. I hear the relay click when keyed but no power output. Question is whats the mod. I guess if I am hearing 11meters it already has the crystals in. Is it the brown wire cut mod that...

Ok so did you try cutting the brown wire on the band switch? did it work? I have a 101E that also has the 11 meter position on the Band switch.

With the Yagi you are limited to rx/tx on the horizontal or vertical depending on how you set up the yagi. With the lightning 4+ you get both at the flip of your coax switch box, better ears than the yagi, More gain per element than the Yagi, and Quads are lighter than yagis.

yep I ran the lightning4+ but later upgraded to the lightning 6 quad beam. Work great:thumbup:

Hi Giannibulldog, I ran a Coily Base Enforcer .64 wave antenna about three years ago. I have upgraded to a 6 element quad beam antenna now but I liked the Base Enforcer .64 wave antenna very much. it is well built, very strong. The antenna is all aluminum, 24 feet tall, and it has four ground...

I appreciate good equipment when I see it too that why I post the pics. I have a pic of the stand alone power supply/Generator that powers this beast.(Propane powered) and Picture of the Beam and tower that channels all that power:drool: but I am not going to post because I am tired of getting...

Can anyone say water cooled???? actually the cooling system for his amplifiers is a Closed Looped Glycol System. You can see the hose lines connected to the cabinet for the driver.

Don't let the cabinet fool you everything is custom made even the tubes, Three phase 480Volt power supply I saw the video of the station being keyed. Dead Key 60,000 watts----- 100,000 watts with an audio. It pegged a Bird Meter with a 100,000 watt slug. The owner of the station does not...

This Super Bowl station slams the needle of a Bird Meter with a 100,000 watt slug in the corner.:drool: Nuff Said!!!!!

I am going to send it to 55 so he can rework it. Thanks

Thanks for all the good info. and thanks for the help. Here are a few pics

What output should I expect to see from a Heathkit SB-220 Tube Amp? It has two 3-500Z tube. What Average, and peak watts out should I expect, and what drive requirement on AM 11 meter band. Thanks

Jay good point..... I am seeing the same thing right now with my Signal Engineering Lightning 4+ Quad Beam. If I change the coax length in the Shack it will change my SWR. Indicating that my coax is part of the antenna system and radiating..... A bad thing:thumbdown: My question is how do I fix...

No it does not get hot... Just warm to the touch with 1KW average watts into it. I looked at the specs again Its rated for 1.5 KW continuous and I am putting 1000+/- continuous watts into the thing. So I guess it is a combination of Harmonics and running it close to its limits. I have a ICE...

So is the insertion loss watts given up as heat?

Is it normal for a low pass filter to get warm to the touch when operating :confused: I have a Bencher YA1 inline. I am running less power than what the filter is rated for, connections are tight and my SWR is below 1.5. Thanks

Thanks for explaining.