Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

2600 Lincoln recieve mods?

F

funbiz99

Guest
I see several mods to improve the recieve. My question is should I combine them or just pick one. For example i could change d11 & d12 I could also change q101.



Should I do both?


</p>
 

I see several mods to improve the recieve. My question is should I combine them or just pick one. For example i could change d11 & d12 I could also change q101.



Should I do both?


</p>
 
Hi I would start with Receive Mod 1:

Increasing the Receive Audio I



To correct this, Add a 4.7uf 16v Electrolytic capacitor across (in Parallel) with R152 (a 560 ohm resistor). This modification will increase the receive audio.



Most say that this does the trick and there is little need to do more.

The Diode mods are next best, The Q101 mod tends to be a bit excesive, (too much gain).



Roger

rogerbird/2510/misc.htm


</p>
 
Hi I would start with Receive Mod 1:

Increasing the Receive Audio I



To correct this, Add a 4.7uf 16v Electrolytic capacitor across (in Parallel) with R152 (a 560 ohm resistor). This modification will increase the receive audio.



Most say that this does the trick and there is little need to do more.

The Diode mods are next best, The Q101 mod tends to be a bit excesive, (too much gain).



Roger

rogerbird/2510/misc.htm


</p>
 
Yes it does,



The Negative lead will be on the Inside Leg of R152, the Positive will be on the Out side leg (Closest to the edge of the PCB)



I have updated the Mod Diagram for this mod on my page.



Rogerbird.tripod.com



I hope this helps...



Roger


</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=rogerbird1>Rogerbird1</A> at: 11/12/04 12:22 am
 
Yes it does,



The Negative lead will be on the Inside Leg of R152, the Positive will be on the Out side leg (Closest to the edge of the PCB)



I have updated the Mod Diagram for this mod on my page.



Rogerbird.tripod.com



I hope this helps...



Roger


</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=rogerbird1>Rogerbird1</A> at: 11/12/04 12:22 am
 

dxChat
Help Users
  • No one is chatting at the moment.


      Top Bottom
      Back