I have an AL-80B. Running it on 240v, I see it hit peaks over 1kw. I don't use the alc cable but turn down the radio's drive into it to only the minimum it needs to key it and allow the audio to drive the amp. IF you set your modulation vi mic gain and processor/compressor to maintain the level at least 90% AND not over modulate by over-driving the mic, you should see similar results. You won't see this on 110v as I tried it on 110 and the max the amp would put out was maybe 800 on peaks and you had to be practically eating the mic to do it. When I switched it over to 240v, things changed and I also installed a graphite tube from RF Parts, which I think has a higher output than original tube.