My Anytone's seem like great products so far. Too bad there's no factory support. That's their biggest downfall. If you buy one and have problems you're up the creek.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Anytone at-6666 v3
- Thread starter Eldorado828
- Start date
In a nutshell, buy at your own risk.
I like mine.
No issues thus far. Same with the
SS9900. Both have been excellent rigs.
I like mine.
No issues thus far. Same with the
SS9900. Both have been excellent rigs.
No info - just wanted to say "Welcome to Worldwide Dx"
TU Aloha
Testing my radio it does to be good I reset everything all seems good
What is the bias on these radios I heard there set to high from factory and that is what makes the finals go like a fuse
mines been fine. Early runs were hitting 70w on FM which cooked finals. They have since addressed that issue.
I had mine setup for 48w AM and 50w SSB and not over modulated. Some still overcrank them. One guy said he has his at 90w sideband but set his transmit timeout to like 30 seconds. On low I see 3w swinging 18-20w. I'm happy with that as well.
I run my power at like 9am and see it swing a hair over 30w on SSB. Perfect for my setup and amp as my voice is usually 22w on avg talking.
I say leave it alone, I've got 2 and both have served well for almost 2 years now. If it ain't broke don't fix it. The ones that have popped are the ones a golden screwdriver has been in and turned potentiometers. The only thing I did to mine was turn down the dead key to 10 watts because it was a little hot for my comfort.
I understand Apple hate but to think Dell built them any better is crazy. My last MacBook went 8 years and I only sold it because I wanted a faster machine. My current is a 2015 model and it is fast and bulletproof. Anyone that has taken a Mac apart has to to appreciate their build quality.
As a shop owner and technician vthe AT quad 6 is hands-down the best 10 meter mobile I think dollar per watt there is. It is basically a smaller version of the striker 955 board with very few differences. The radio is an expensive and quite a performer. As mentioned in a previous posting, FM power turned up too high cooked a lot of radios, and the way to defeat that issue is to set the power levels at reasonable levels when tuning for all moods. Outo the box it is quite powerful. With the NPC/RC mod opens up the swing incredibly, up to 30 Watts average from a 6 watt dk. I sell them with 1/2 watt deadkey on low-power and a 6 watt dead key on high-power. I have yet to have one come back with any problems. I have sold over a hundred of them. They are manufactured by the same company that manufactures the Stryker series of radios, CRT or Superstar radios etc. Qixiang electron technology group in Shenzhen China. I have been impressed Time after Time after Time with the build quality, performance, and reliability of this fantastic little radio. the only thing I wish they did was put a better microphone on it that was not an electret condenser mic, though many of my customers sound just fine with the stock mic. Crystal clear audio, some of the best build quality available and definitely a Galaxy killer.
Last edited:
Can you give us any info on the npc/rc? I have a 5555 and think it rivals my 955 and only half the cost.
I myself am now curious about that npc/rc mod.
I like the anytone at6666 great radio out of box not sure what version it is a few people tell me to get the finals replaced but for now I use it the way it is
What would you replace the finals for and to which ones. If you're talking about the 2030+ believe they are overrated for what they are. The radio with either the 520's or 13n10's does exactly what it was designed to do and does really well as is. That's just my take on it
I'm just useing it the way it is if they go out down the line.then I'll get it fix but works good so doesn't need fixed