-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Avanti Sigma II
- Thread starter w9cll
- Start date
I'd just make one from a new SPT-500 and a ring of aluminium in place of the hygain
u-turn match and put a piece of fiberglass rod into the radiator element just above the radials.
Don't forget to wrap an 8-10 turn choke to ground around the fiberglass, from the tap point at the ring feed, to ground.
Tell me it's not 267" where the Sigma-II tunes best for .385!
u-turn match and put a piece of fiberglass rod into the radiator element just above the radials.
Don't forget to wrap an 8-10 turn choke to ground around the fiberglass, from the tap point at the ring feed, to ground.
Tell me it's not 267" where the Sigma-II tunes best for .385!
I picked one of those 5/8's sigmas a few years ago the coil area was destroyed but a buddy made me a new one
...runna pile-up on 6m SSB