• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

BACKWOODS RF Freq Counter Hookup

unit_399

EL CAPO
I Support WorldwideDX.com!
Jun 17, 2008
2,334
3,813
273
ALEJANDRIA, COLOMBIA SA
I have a BACKWOODS RF freq counter for TRC-457 radio. I need the connection info. I believe the counter input goes to the VCO output, but not certain. Ralph made some fine gear before he passed.

-J.J. 399
 

Hey 399,

I might have some old info from Ralph around here.
I'll look tonight.

I think i remember Nomad talking about Ralph's novel way of feeding the counter on the 858 chassis, so he probably has some info about it.
LC
 
counter input goes to the VCO output,

Nope. Doesn't measure the VCO. It taps into the PLL chip's input pin. Counts the PLL chip's input frequency and does the math from there to display five digits of channel frequency. The need for only 5 digits becomes apparent when you turn the clarifier knob.

The display reading won't change. The clarifier's effect on your frequency is outside the PLL chip. The uPD858 gets the same input frequency fed into it no matter where you turn the clarifier knob.

It's a clever idea, and Ralph deserves credit for dreaming it up and writing the code.

Haven't seen anyone else try that trick.

73
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Greg T has left the room.
  • @ BJ radionut:
    EVAN/Crawdad :love: ...runna pile-up on 6m SSB(y) W4AXW in the air
    +1
  • @ Crawdad:
    One of the few times my tiny station gets heard on 6m!:D
  • @ Galanary:
    anyone out here familiar with the Icom IC-7300 mods