Means the purple wire the section it goes to in the back, has a problem, from a blown final - dead short - onto a blown diode (bias type) open popped like a fuse - you need to investigate, look for soldering issues, else parts (possibly more than one since you can TX on AM but not SSB) needs to be replaced - the purple wire is a feed from the AM / SSB mode switch power branch - one side goes to the AM Regulator (TR41 and TR42) routes to the front panel - along with wires from the Power choke to that mode switch - then goes back to the power choke, using TP "stems" and routes from there to their Driver or Final sections.
IF work has been done previously - the section that purple wire affects, may need to be rebuilt or at least ohmed-out using a DVM in Continuity-setting for dead short checks as well as Ohmic and Voltage checks afterwards in AM mode - then in SSB - with the power off if necessary to prevent damage while checking for those shorts..