So I replaced TR24 in this radio to restore the AM limiter (or so i thought). But even after doing so, I do not notice any change when I adjust VR12. Could there be another component that was removed ? I don’t see anything obvious. Not a big deal, just curious why it doesn’t work. Guess I should also check VR11. Not sure if that works either. Thanks.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!
Cobra 2000 VR12
- Thread starter Brian G
- Start date
Check if r131 was removed or cut.
service manual here - http://www.cbtricks.com/radios/cobra/2000gtl/graphics/cobra_2000gtl_sm.pdf
service manual here - http://www.cbtricks.com/radios/cobra/2000gtl/graphics/cobra_2000gtl_sm.pdf
It was cut. But when I replaced it, the modulation is all cut up, hard to explain. Choppy sounding. VR12 still doesn’t appear to do anything but it’s hard to tell with the choppy modulation. If I remove it, it goes back to sounding fine.
- No one is chatting at the moment.
-
-
-
-
-
@ BJ radionut:NOTICE: The Midwest 6 Meter DX Group will be set up at Hamvention in Xenia...BOOTHS 9107-9111...COME SAY HELLO!+1
